Thermal mass flow meter mass flow rate | English Chinese translation | Turbine flow meter

『thermal mass flow meter mass flow rate|turbine flow meter』Related information(v cone flow meter|rotary gas meter|gallon meter|gear meter|metal tube rotameter|glass tube rotameter|nutating disk meter|transit time ultrasonic flow meter|wedge flow meter|pd meters|hydraulic flow meter|ultrasonic water flow meter|water flow meter|air flow meter|magnetic water flow meter|oxygen flow meter|gas flow meter|argon flow meter|air velocity meter|gasoline flow meter|fuel flow meter|ultrasonic water meter|digital water meter|nitrogen flow meter|solid flow meter|Oxygen tank flow meter|digital water flow meter|diesel fuel flow meter|steam flow meter|02 flow meter|compressed air flow meter|oil flow meter|liquid flow meter)

1. Main technical parameters of melt index

WJ-400B melt flow rate measuring instrument telephone manufacturer The melt flow rate measuring instrument is used to determine the mass flow rate (MFR; unit: g/10min) of thermoplastic melt according to GB/T3682-2000, ASTM D1238-98 standards, and similar standards such as JB/T545

6, ISO1133, etc. Widely used for the determination of the melt index value of thermoplastic materials, it is suitable for engineering plastics such as polycarbonate, nylon, fluoroplastics, and aramid with high melting temperatures, as well as for testing plastics with low melting temperatures such as polyethylene, polypropylene, polystyrene polyoxymethylene resin, ABS resin, etc. It is widely used in industries such as petrochemicals, plastic raw materials, plastic production, plastic products, and related testing departments, research institutions, and colleges and universities.

1. The instrument complies with the requirements of JB/T5456 standard and is applicable to standards such as GB/T3682-2000 and ISO1133.

6、 Technical specifications for melt flow rate meter ISO113Plastics—Determination of themeltmass-flow rate(MFR) and melt volume-flow rate(MVR) of thermoplastics – Part 1:Standard method

2、 Technical parameters

1. Display mode: LCD display.

2、 Measurement method: Mass method (MFR), volume method, MVR density method

3. Constant temperature range: Room temperature -450 ℃, any point can be kept at a constant temperature. (Temperature can be adjusted

4. Temperature accuracy: ± 0.2 ℃. Temperature recovery time: less than 4 minutes

5. Temperature resolution: 0.1 ℃.

6、 Timing range: 0.1-999 seconds.

7、 Timing accuracy: 0.1 seconds.

8、 Cutting methods: automatic, manual, and time controlled. Cutting frequency: 1-99 times. Cutting time interval: 10-600 seconds;

9、 Equipped with a printer that can print test reports.

10、 Material of mouth mold: tungsten carbide. 1

1、 Mouth mold diameter: 2.095 mm. 1

2. Power supply voltage: AC220V ± 10%, 50Hz can work continuously for tens of thousands of hours.

III. Standard Configuration

1. Host 1

2. 8 weights (0.325kg, 1.2kg, 2.16kg, 3.8kg, 5.0kg, 10.0kg, 12.5kg, 21.6kg)

3. 1 level

4. 1 mouth mold

5. 1 mouth mold cleaning rod

6. 1 drum cleaning rod

7. 1 loading rod

8. 1 hopper

9.

10, 1 manual knob 1

1. Instruction manual, packing list, certificate of conformity 1 set 12. Packaging size: 780 * 580 * 640 (mm)

2. Materials Studio official tutorial: Cantera module - Research surface reaction [4] _ Baidu Knowledge ..

Materials Studio official tutorial: Cantera module - Research surface reactions

[4] mainly introduces the steps of setting Cantera flow reactor calculation parameters, running calculations, analyzing results, and viewing Python code. The specific steps are as follows: set Cantera flow reactor calculation parameters to restore default settings: select Tools | Settings Organizer from the menu bar, select Cantera and click the Reset button to close the dialog box. Set PFR parameters: Open the original RuO2xsurface.std data table file.

『SILVER Official Website SERVICE』